Tandem arrangement Bearings
Tandem bearing arrangement (also known as “DT arrangement”) is a type of duplex bearing arrangement where the two half are placed so that contact angle lines are parallel.
The use of a tandem arrangement provides increased axial and radial load carrying capacity compared to a single bearing. In a tandem arrangement , the load lines are parallel so that radial and axial loads are shared. The bearing set can only accommodate axial loads acting in one direction. If axial loads act in both directions, or if combined loads are present, additional bearing(s) adjusted against the tandem arrangement must be added.
- SKF S71908 CDTP/P4B Super Precision Bearings
- SKF
- S71908 CDTP/P4B
- SKF 7016 CE/HCP4AH1 PRECISION BALL BEARINGS
- SKF
- 7016 CE/HCP4AH1
- SKF S7010 ACE/HCP4BVG275 High precision angular contact ball bearings
- SKF
- S7010 ACE/HCP4BVG275
- SKF S7003 CE/HCP4BVG275 High precision angular contact ball bearings
- SKF
- S7003 CE/HCP4BVG275
- SKF 71924 CE/P4AL High precision angular contact ball bearings
- SKF
- 71924 CE/P4AL
- SKF 7017 CD/P4AL High precision angular contact ball bearings
- SKF
- 7017 CD/P4AL
- SKF 7018 ACB/HCP4AL Angular Contact Ball Bearings
- SKF
- 7018 ACB/HCP4AL
- SKF 71908 ACDTP/HCP4B Angular Contact Ball Bearings
- SKF
- 71908 ACDTP/HCP4B
- SKF S7020 CE/HCP4BVG275 Super Precision Bearings
- SKF
- S7020 CE/HCP4BVG275
- SKF S7009 ACE/P4BVG275 Angular Contact Ball Bearings
- SKF
- S7009 ACE/P4BVG275
- SKF S71909 ACDTP/P4B super-precision Angular contact ball bearings
- SKF
- S71909 ACDTP/P4B
- SKF S7005 ACE/P4BVG275 PRECISION BALL BEARINGS
- SKF
- S7005 ACE/P4BVG275