Tandem arrangement Bearings
Tandem bearing arrangement (also known as “DT arrangement”) is a type of duplex bearing arrangement where the two half are placed so that contact angle lines are parallel.
The use of a tandem arrangement provides increased axial and radial load carrying capacity compared to a single bearing. In a tandem arrangement , the load lines are parallel so that radial and axial loads are shared. The bearing set can only accommodate axial loads acting in one direction. If axial loads act in both directions, or if combined loads are present, additional bearing(s) adjusted against the tandem arrangement must be added.
- SKF 7013 ACE/HCP4BVG275 Precision Ball Bearings
- SKF
- 7013 ACE/HCP4BVG275
- SKF S71907 ACDTP/HCP4B PRECISION BALL BEARINGS
- SKF
- S71907 ACDTP/HCP4B
- SKF 71908 ACE/P4AL High precision angular contact ball bearings
- SKF
- 71908 ACE/P4AL
- SKF S7018 CE/HCP4BVG275 High precision angular contact ball bearings
- SKF
- S7018 CE/HCP4BVG275
- SKF S7012 CDTP/P4B Super Precision Angular Contact bearings
- SKF
- S7012 CDTP/P4B
- SKF 7012 ACDTP/HCP4B Angular Contact Ball Bearings
- SKF
- 7012 ACDTP/HCP4B
- SKF 71905 ACDTP/HCP4B High precision angular contact ball bearings
- SKF
- 71905 ACDTP/HCP4B
- SKF 7022 CE/P4AL1 Precision Ball Bearings
- SKF
- 7022 CE/P4AL1
- SKF 71910 CE/HCP4AH1 Super Precision Angular Contact bearings
- SKF
- 71910 CE/HCP4AH1
- SKF S7003 ACE/P4BVG275 super-precision Angular contact ball bearings
- SKF
- S7003 ACE/P4BVG275
- SKF S7010 CE/P4BVG275 Precision Ball Bearings
- SKF
- S7010 CE/P4BVG275
- SKF 7014 ACE/P4BVG275 Super Precision Angular Contact bearings
- SKF
- 7014 ACE/P4BVG275