Tandem arrangement Bearings
Tandem bearing arrangement (also known as “DT arrangement”) is a type of duplex bearing arrangement where the two half are placed so that contact angle lines are parallel.
The use of a tandem arrangement provides increased axial and radial load carrying capacity compared to a single bearing. In a tandem arrangement , the load lines are parallel so that radial and axial loads are shared. The bearing set can only accommodate axial loads acting in one direction. If axial loads act in both directions, or if combined loads are present, additional bearing(s) adjusted against the tandem arrangement must be added.
- SKF 7003 ACE/P4BVG275 Super Precision Bearings
- SKF
- 7003 ACE/P4BVG275
- SKF S7009 CE/HCP4BVG275 super-precision Angular contact ball bearings
- SKF
- S7009 CE/HCP4BVG275
- SKF 7004 CE/HCP4AH1 PRECISION BALL BEARINGS
- SKF
- 7004 CE/HCP4AH1
- SKF S7007 ACE/HCP4BVG275 Precision Ball Bearings
- SKF
- S7007 ACE/HCP4BVG275
- SKF 71906 ACDTP/P4B super-precision Angular contact ball bearings
- SKF
- 71906 ACDTP/P4B
- SKF 7014 ACDTP/P4B Super Precision Angular Contact bearings
- SKF
- 7014 ACDTP/P4B
- SKF S7006 ACDTP/HCP4B Super Precision Angular Contact bearings
- SKF
- S7006 ACDTP/HCP4B
- SKF S7018 ACDTP/P4B Super Precision Bearings
- SKF
- S7018 ACDTP/P4B
- SKF S7016 CDTP/P4B Precision Ball Bearings
- SKF
- S7016 CDTP/P4B
- SKF S7006 CDTP/P4B High precision angular contact ball bearings
- SKF
- S7006 CDTP/P4B
- SKF 71908 CDTP/HCP4B Precision Ball Bearings
- SKF
- 71908 CDTP/HCP4B
- SKF 7008 ACDTP/HCP4B Super Precision Bearings
- SKF
- 7008 ACDTP/HCP4B